The pattern envelope is where most beginners stop. Not the machine, not the fabric. The envelope. You open it, the tissue unfolds into something the size of a tablecloth, it is covered in lines and triangles and dots, and the instruction sheet reads like it was written for someone who already knows how to sew. So the tissue goes back in the envelope, the envelope goes in a drawer, and the drawer is where a lot of people’s sewing ends.
I have taught hundreds of beginners in the studio, and I can tell you that nothing on that tissue is difficult. Every mark is a message from the person who drafted the pattern, and there are fewer than twenty of them. Learn the language once and every pattern you ever open, from any company, in any country, will read the same way.
This is that language, in the order you will actually meet it.
Start with the envelope, not the tissue
The envelope is the pattern’s brief, and it tells you most of what you need to know before you touch the paper inside.
The front shows the garment, usually as a photograph or illustration, in two or more views labeled with letters. View A might be the sleeveless version, View B the one with sleeves and a collar. The photograph is a mood. The line drawing next to it, or on the back, is the truth. Line drawings show every seam, every dart, every closure, and how much room the garment has in the body. If you learn to read one thing on an envelope, learn to read the line drawing, because it tells you what you are actually going to make.
The back of the envelope carries the rest. A written description of the garment, which often includes details you cannot see in the photo, like “fitted through the bust” or “loose-fitting.” A list of suggested fabrics, which is a code for how much drape and body the design needs, and worth taking seriously. A yardage chart that tells you how much fabric to buy for each size, at each common fabric width, sometimes with a separate line for fabric “with nap,” meaning fabric that looks different depending on which way it hangs. A list of notions: thread, zipper, buttons, interfacing, elastic. A chart of body measurements by size. And, if the company is a good one, a chart of finished garment measurements, which is the most useful set of numbers on the whole envelope, for reasons I will come to.
Read the back of the envelope twice. It saves you a hundred dollars and a weekend.
Choosing your size: the part everyone gets wrong
Your pattern size is not your retail size. Say it out loud if you need to. A woman who buys a 10 in a store will often cut a 14 or a 16 in a pattern, because pattern companies use a measurement standard that has not tracked ready-to-wear sizing for decades. This is the single most common reason a beginner’s first garment does not fit, and it has nothing to do with skill.
So you measure. Bust, waist, and hip at minimum, and I would add high bust, which is the measurement around your chest above the bust, under the arms. If you have never measured yourself properly, do it before you buy the pattern; I wrote How to Take Your Own Measurements (Without Cheating) for exactly this moment, and cheating is the operative word, because everyone pulls the tape a little tight.
Then you compare your numbers to the body measurement chart on the envelope, and here is where beginners need one more piece of information. Your body has zones, and the zones do not all wear the same size. I wrote about this in Why You Are Not a “Size 12”, and the short version is that you should choose the size for the zone the garment fits most closely. For a top or a dress with a fitted bust, choose by the high bust and adjust the bust itself if needed. For pants and skirts, choose by the hip and adjust the waist. Almost every pattern today is printed with several sizes nested inside one another, so you can cut a 14 through the bust and blend out to a 16 at the hip. That blending is called grading between sizes, and it is not an advanced technique. It is a pencil line.
The finished garment measurements
Now the chart I mentioned. Finished garment measurements tell you how big the sewn garment will be at the bust, waist, and hip. The difference between the finished measurement and the body measurement is ease. Some ease is wearing ease, the room you need to breathe and move. Some is design ease, the extra room the designer added for the look. A “loose-fitting” tunic might have eight inches of ease at the bust. A fitted bodice might have two.
The trick that saves beginners the most grief is this: take a garment you already own and love the fit of, measure it flat at the bust, waist, and hip, and compare those numbers to the finished garment measurements on the envelope. If your favorite shirt measures 40 inches at the bust and the pattern’s finished bust in your size is 44, you now know the pattern will feel four inches roomier than what you love, and you can size down or accept it on purpose. The body chart tells you what size you are. The finished chart tells you how the garment will feel. Use both.
The symbols on the tissue
Unfold the tissue and lay it flat. Every pattern piece carries the same small set of marks, and once you know them, the sheet stops looking like a diagram of a subway system.
The grainline
A long straight line with an arrow at one or both ends. This is the most important mark on the piece. It tells you how to lay the piece on the fabric: the grainline runs parallel to the selvage, the finished edge of the fabric. Fabric behaves differently along its length, its width, and its diagonal, and a piece cut off grain will twist, hang wrong, and never press flat. If you want to understand why, Woven vs. Knit is the two minute lesson on what the grain actually is. For now: measure from the grainline to the selvage at both ends of the arrow, make the measurements match, and pin.
Place on fold
A line along one edge of the piece with a bracket and arrows pointing to it. This edge goes exactly on the fold of the fabric, and the piece is cut through both layers so that when you open it, you have one symmetrical piece twice the size. Center front and center back of many garments are cut this way. Do not add seam allowance to a fold edge, and do not cut along it.
Cutting lines and sizes
Multi-size patterns nest their cutting lines, each size in a different line style: solid, dashed, dotted. Find your size in the key, and before you cut anything, trace it with a highlighter all the way around the piece, blending between sizes where you decided to grade. Beginners lose their line at every corner. The highlighter is not optional.
Many sewists trace the piece onto separate paper rather than cutting the tissue, so the other sizes are preserved. If the pattern was expensive or you expect your body to change, trace.
Seam allowance
The seam allowance is the distance between the cutting line and the stitching line. Most American envelope patterns include a five eighths inch seam allowance and mark it on the piece. Many independent designers include three eighths or half an inch. Japanese pattern books and some European magazines include none at all, and you add your own before cutting. The envelope or the instruction sheet always says which. Check every time, because sewing a five eighths inch seam on a pattern that only allowed three eighths makes a garment half a size smaller.
Notches
Small triangles on the cutting line, singly, in pairs, or in threes. Notches are matching marks. A single notch on the front armhole meets the single notch on the front of the sleeve. A double notch on the back armhole meets the double notch on the back of the sleeve. They tell you which piece goes with which and which way round, and they are what keep a sleeve from going in backwards. Cut them outward, as little triangles beyond the cutting line, or mark them with a snip no deeper than an eighth of an inch. Do not cut them inward as big triangles into the seam allowance.
Dots, circles, and squares
These are placement and matching marks that sit inside the piece rather than on its edge. A dot at the end of a dart tells you where the dart point is. A dot on a sleeve cap tells you where it meets the shoulder seam. Squares often mark where a pocket or a tab sits. A circle can mark a pivot point, where you stop stitching and turn. Every one of these needs to be transferred from the tissue to the fabric, with chalk, a water-soluble pen, a tracing wheel and paper, or a tailor’s tack. The garment is assembled by matching them.
Darts
A dart is drawn as a long narrow triangle with two legs meeting at a point. The legs are stitching lines, the point is where the stitching ends, and the space between the legs is fabric that gets folded away to shape the flat cloth around a curve of your body. Transfer both legs and the point. Most bust and waist shaping on a woven garment happens here, and a dart is easy to sew once it is marked properly and nearly impossible to sew if it is not.
Lengthen or shorten here
A pair of parallel lines across the piece, usually with the words printed between them. This is where the designer intends you to cut the pattern apart to add or remove length without distorting the shape. If you are tall or short-waisted or long in the arm, this is where you fix it, on the paper, before you cut.
Buttons, buttonholes, pleats, and gathers
Buttonholes are drawn as short lines with a bar at each end; buttons as an X or a circle. Pleats and tucks show as fold lines with an arrow telling you which direction to fold. Gathers are a dotted or dashed line between two notches, meaning you sew gathering stitches between those points and draw the fabric up to fit the piece it joins. All of these get transferred to the fabric before you sew.
The label on every piece
Each piece is printed with its name, its number, the view it belongs to, and cutting instructions. “Front bodice, 1, Views A and B, cut 1 on fold.” “Sleeve, 4, View B, cut 2.” “Front facing, 6, cut 2 fabric, cut 2 interfacing.” Read every label before you cut. “Cut 2” means two mirror-image pieces, which is what you get by cutting through fabric folded right sides together. “Cut 1 on fold” means one symmetrical piece. If a piece says to cut interfacing or lining as well, it goes on your cutting list twice.
The cutting layout
The instruction sheet includes a set of small diagrams showing how to arrange the pieces on the fabric for each view, each size range, and each fabric width. Find the one that matches all three. The diagram shows the fabric folded, usually selvages together, and each piece placed with its grainline running the right way. Shaded pieces are placed face down. Pieces that hang off the fold are cut once on a single layer.
Before you lay anything out, pre-wash and press the fabric the way you will wash the finished garment. Fabric shrinks. A garment that fit before its first wash and not after was cut from fabric that was never washed, and no pattern skill fixes that.
Pin the pieces or hold them with weights, cut with long smooth strokes on the cutting line, cut the notches outward, and before you lift a single piece off the fabric, transfer every dot, dart, and placement mark. This is the step everyone wants to skip. Do it while the tissue is still pinned, because once the pieces are separated, the marks are gone.
The instruction sheet
The instruction sheet opens with general directions, sometimes a glossary, and a numbered sewing order with a diagram for each step. In the diagrams, the right side of the fabric is usually shown plain and the wrong side shaded; interfacing is often shown as dots. Read the whole sequence once before you cut, because the order tells you which pieces you need first and which you can cut later.
Understand that the sewing order is a suggestion from a company that has to write for everyone. As you learn, you will change it. I press seams as I go and I sew every dart before I join anything, and there are steps in most commercial instructions I do in a different order. The pattern gives you a road. It does not tell you how to drive.
Paper, PDF, and pattern books
Not every pattern comes in an envelope. A PDF pattern is printed at home on letter or A4 paper, and the first thing you do with one is print the single page that carries the test square and measure it with a ruler. If the square is not exactly the size printed on it, your printer scaled the pattern, and every piece will be wrong. Print at one hundred percent, actual size, never “fit to page.” Then trim and tape the pages in the grid the pattern shows you. Many designers also offer a copy shop file that prints on a single large sheet, which costs a few dollars and saves an evening.
Japanese pattern books, which I love and wrote about in The Ultimate Guide to Sewing with Japanese Patterns, print all the pieces overlapping on a few large sheets. You trace your size onto separate paper, and you add seam allowance yourself, because the pieces are drawn to the stitching line. Once you can read an envelope pattern, a Japanese book is the same language with one extra step.
Six mistakes I see in every beginner class
Cutting your retail size. Measure, use the chart, and expect to cut larger than you buy.
Skipping the test square on a PDF. Every piece is wrong by the same percentage, and you will not find out until the garment does not fit.
Ignoring the grainline. A piece that is “close enough” to straight will twist on the body. Measure to the selvage at both ends of the arrow.
Cutting notches inward or not at all. Notches are how the pieces find each other. Cut them outward, every time.
Not transferring the dots and darts. If it is printed inside the piece, it needs to be on your fabric before the tissue comes off.
Sewing the wrong seam allowance. Check what the pattern includes. Three eighths and five eighths are not interchangeable.
A first pattern checklist
Before you cut, you should be able to say yes to each of these.
- I have measured my bust, high bust, waist, and hip this month.
- I chose my size from the body chart by the zone this garment fits most closely, and I know where I am grading between sizes.
- I compared the finished garment measurements to a garment I love.
- I know what seam allowance is included.
- I have highlighted my cutting line on every piece.
- My fabric is pre-washed and pressed.
- I found the cutting layout for my view, my size, and my fabric width.
- I have a plan for transferring marks before the tissue comes off.
What the pattern cannot tell you
A pattern can tell you how to cut and how to assemble. It cannot tell you how the garment will fit your body, because the person who drafted it has never met you. The measurements on the envelope are an average. Your shoulders, your bust point, your back length, and your hip curve are not.
This is the reason I teach fit as its own subject, and why I stopped asking students to make throwaway test garments years ago; the wearable check-fit is how we test a pattern on a real body without wasting fabric. Once you can read a pattern, the next skill is changing it, and the seven adjustments I make most often are in How to Alter Clothes to Fit Your Body. Further down the road, you will draft your own block and stop depending on the envelope at all, which is what What Is a Sloper? is about.
But that is later. First, the language.
Learn to read patterns with me
I built the Beginner Patterns Online Class for the person standing in front of the drawer with the envelope in it. The first module decodes every symbol, marking, and layout on a commercial pattern, and the second teaches you to choose and adjust your size from your own body instead of the chart, so the first garment you make is one you can wear. If you have never sewn at all, start with the Beginner Sewing Class and come to patterns second. If you are near Louisiana, we do all of this in person at the studio in Baton Rouge, and you can see what is on the schedule on the sewing classes page.
Two more things worth bookmarking: the Master Glossary, for every term on this page and a few hundred more, and the Studio Supply List, so you have the chalk, the tracing wheel, and the ruler before you need them.
The tissue is not a test. It is a letter from the person who drew the garment.
Read it.
Frequently asked questions
What size sewing pattern should I cut?
The size whose body measurements match the zone the garment fits most closely: high bust for fitted tops and dresses, hip for skirts and pants. Expect it to be larger than your retail size, often by two or more sizes. Then compare the finished garment measurements to a garment you love and adjust from there.
What do the notches on a sewing pattern mean?
Notches are matching marks. A single notch on one piece meets a single notch on the piece it joins, a double meets a double, and so on. They tell you which pieces go together and which way round. Cut them outward and match them as you pin.
What does “cut 2” mean on a pattern piece?
Cut two mirror-image pieces, which is what you get automatically when you cut through fabric folded with right sides together. “Cut 1 on fold” means one symmetrical piece with its center on the fold. “Cut 2 interfacing” means the same shape again, in interfacing.
Do I need to add seam allowance to a sewing pattern?
Only if the pattern says it does not include one. Most American envelope patterns include five eighths of an inch. Many independent designers include three eighths or half an inch. Japanese pattern books and some European magazine patterns include none, and you add your own before cutting. The envelope or the instructions always say which.
Are PDF patterns harder to read than paper patterns?
No, the symbols are identical. The extra work is printing at actual size, checking the test square, and taping the pages together. If that sounds tedious, most designers sell a copy shop version that prints on one large sheet.
Online course · $75
Read any sewing pattern with confidence
Basic Beginner Patterns takes you from opening the envelope to cutting your fabric: the symbols and markings, choosing your size by measurement, and laying out your pieces on grain.
See Basic Patterns Not sure where to start? Find your starting point

